Skip to main content

How to Use the Record Player

Record players are only available in BASE S, M, and L rooms.

1. Preparing Before Playing a Record

  • Turn off the projector: Before using the record player, please turn off the projector. You can do this by opening the projector widget on the in-room iPad home controller and switching the projector off.

2. Setting Up and Playing a Record

  • Setting up the record: Open the dust cover and gently place the record on the turntable’s spindle. If you are playing a 7-inch (EP) record, attach the included EP adapter to the spindle before placing the record.
  • Selecting the rotation speed: Choose the appropriate speed for the record using the speed selector:
    • 33 1/3 RPM (long-play records)
    • 45 RPM (singles)
  • Starting playback: Press the START button. The platter will begin spinning, and the tonearm will automatically move to the record’s starting position to begin playback.

3. Adjusting the Volume

  • Using the volume control: Adjust the volume by turning the knob on the volume controller. Gradually increase the volume to a comfortable level.

4. Stopping Playback

  • How to stop: Press the STOP button. The tonearm will return to its original position, and the platter will stop spinning. Once playback is finished, the tonearm will automatically return, and the platter will stop.

5. Important Notes

  • If no sound plays: If no sound is heard, open the projector widget on the in-room iPad home controller and tap "Can't play the record?". If the issue persists, please contact us via chat.
  • After use: When you’re done listening, remove the record and close the dust cover.

6. Troubleshooting (If No Sound is Heard)

If no sound is heard, please check the following steps:

  1. Check the Condition of the Stylus (Needle)

    • Make sure the stylus is not damaged.
    • Confirm that the stylus is securely attached to the cartridge.

  2. Check the Tracking Force and Anti-Skating

    • Ensure the tracking force is adjusted to 2.0g.

      Screenshot 2025-02-04 at 17.38.36.png

    • Confirm that the anti-skating setting matches the tracking force.

      image (5) (1).png

  3. Check the PHONO/LINE Switch

    • Ensure it is set to "LINE."

      Screenshot 2025-02-04 at 17.43.30.png

  4. Try Restarting

    • Unplug the power cord, wait a few seconds, plug it back in, and try playing the record again.

For a visual guide on how to operate the record player, please refer to the video below:

 

The content of the Help Center, various terms and conditions, and policies are provided in both English and Japanese. However, in the event of any inconsistencies, the interpretation in Japanese prevails in all respects.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Return to top

Related articles